Hello, World!

Getting Started:
After years of dreaming, I've finally started my adventure in building an RV-14a.  I'm still working full time, so the project will largely be a weekend and vacations deal.  All told, I expect this project to take a significant amount of time to complete.

Initial Setup:
I've started by expanding my tool kit.  This includes some of the nice-to-haves like DRDT-2, multiple EAA 1000 tables, lots of extra cleco's, and a pneumatic squeezer.


Unboxing:
The Saia delivery wasn't too difficult.  Note to self, buy some better snips than the ones from Harbor Freight.


After an initial inventory, all the sub-kits appear to be in order.  Unfortunately, the sun was setting and temperatures were dropping, so the full inventory will have to wait.


Comments

  1. quintinadaitchNovember 8, 2022 at 7:45 PM

    This site supports very excessive 먹튀사이트 먹튀프렌즈 deposit limits, especially when users pay with cryptocurrency. In addition, there are lots of of video games out there, together with excessive limit slots. These are mobile slots may be} place to} settle for bets of $100 or extra per spin. Koreans can gamble from the consolation of their very own properties, they usually can do so at any time of day or evening.

    ReplyDelete
  2. wahidawadlerNovember 8, 2022 at 7:55 PM

    It'll let you know what type of sport it's, what each spin pays out, and particulars on the jackpot. Machines are usually grouped by denomination, style and brand name. Video slots have a HELP or INFO button that can stroll you through the various payouts, play traces, bonus games and special features. That's principally finest way|the way in which} during which the house 토토사이트 edge gets displayed for slots. No matter the way you take a look at|have a glance at} it, in the long run|the lengthy term}, the on line casino will always come out on high. However, the short-term end result of slots is random, so you've have} one of the best slot machine odds when you play a slot that has an RTP of 97% or higher.

    ReplyDelete

Post a Comment

Popular posts from this blog

Off to the Races

Image
Vans Practice Kit and Starting the Vertical Stabilizer: Every year, gearheads from around the world congregate at the Circuit of the Americas track for Moto GP.  My best friend, being one such gearhead, came to Austin to enjoy the races and experience the area.  While he was here, we ended up heading to the hangar to try our hand at building some airplane (practice) parts.  We ended working through to step 6 of the practice kit, attaching and match drilling the skins to the 7 before it was time to head back. The following week, I spent a few hours making some more progress on the kit, rounding out the build by wrapping up just before riveting the flanges and trailing edge. I also ordered a few more parts, and finally embedded a back rivet plate into one of the workbenches I've been holding off on picking up a back rivet plate only because I hoped I could source a cold-rolled steel plate locally.  As it turned out, the ease of simply ordering one online outweigh
Read more

"Like Working in a Convection Oven"

Image
A Visit from the EAA Chapter: Last week saw a visit from the local EAA chapter, after the morning's meeting.  I did a little show-and-tell, explaining to some of the members what was going on, what various contraptions were used for what.  To my benefit, some of the other builders in the club took a look over my work thus far. They pointed out that I should prime the final-drilled hinge bracket attach holes as the brackets themselves are steel, and will corrode if not treated.  Not a big deal, I'm going to be priming the skeleton of the rudder next week, so I'll drill out the brackets and touch them up then. Starting the Rudder With the newfound confidence of (mostly) finishing my first actual airplane part, I finally got along to starting the rudder.  Having read ahead in the instructions, it looks like the riveted trailing edge will present the biggest hurdle.  Lucky me, I've practiced once on the preview kit, and did alright.  This one has a pre-dri
Read more

Finalized Shop Setup, Built a Toolbox

Image
Finished shop setup... for now: My hope was to have completed Van's toolbox project last week, but getting all the bench tools assembled, mounted, and tested took longer than expected.  Much like the week before, the only productive day this weekend was Sunday.  After picking up a bench grinder, and assorted mounting hardware, I made my way to the hangar.  I started by assembling and positioning the tools where I thought they would be best placed, and then traced out and drilled mounting holes for each.  I then tested each by powering them on and waiting for the explosion. I must have spent an hour figuring out how to set up that band saw. This time around, I thought I would experiment with a time-lapse setup with my old GoPro.  I was able to record the entire session with a new 128GB card, and I'll edit and upload it to YouTube when I get the chance. Built the Van's Toolbox Kit: Confident that I wasn't going to lose a finger to the band saw unless it
Read more